No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
INFO/4/DBG_ALL

INFO/4/DBG_ALL

Message

INFO/4/DBG_ALL:When deciding whether to turning on all the debugging switches, the user chose [Y/N].

Description

The user confirmed whether to enable all debugging functions by selecting "Y" or "N".

Parameters

Parameter Name Parameter Meaning
[Y/N] prompts the user to confirm the action. If "Y" is selected, the action will be performed; if "N" is selected, the action will not be performed.

Possible Causes

The debugging all command was run.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 553145

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next