No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RRPP/5/PFWD_REASON

RRPP/5/PFWD_REASON

Message

RRPP/5/PFWD_REASON:Domain [domain-id] ring [ring-id] port [port-name] has been set to forwarding state. (Reason=[STRING])

Description

A port on an RRPP ring went in to the Forwarding state.

Parameters

Parameter Name Parameter Meaning
domain-id RRPP domain ID
ring-id RRPP ring ID
port-name RRPP port name
Reason Log generation reason:
  • fail-timer expired: The Fail timer expired.
  • complete-flush-fdb packet: A COMPLETE-FLUSH-FDB packet was received.

Possible Causes

Cause 1: The Fail timer expired.

Cause 2: A COMPLETE-FLUSH-FDB packet was received.

Procedure

  • This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 574379

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next