No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LACP/3/OPTICAL_FIBER_MISCONNECT

LACP/3/OPTICAL_FIBER_MISCONNECT

Message

LACP/3/OPTICAL_FIBER_MISCONNECT: The member of the LACP mode Eth-Trunk interface received an abnormal LACPDU, which may be caused by optical fiber misconnection. (TrunkName=[STRING], PortName=[STRING], LocalParam=[STRING], PDUParam=[STRING])

Description

The member of an Eth-Trunk interface in static LACP mode received an abnormal LACPDU, which may be caused by the optical fiber misconnection.

Parameters

Parameter Name Parameter Meaning
TrunkName Name of an Eth-Trunk interface in static LACP mode
PortName Name of the member interface of the Eth-Trunk interface in static LACP mode
LocalParam Local parameters
PDUParam Local parameters received using LACPDUs

Possible Causes

The optical fiber connection was incorrect, or packets were invalid.

NOTE:

During an LACP negotiation between a Huawei device and a non-Huawei device, if the non-Huawei device implementation does not completely comply with the LACP protocol standard, the log may be reported on the Huawei device.

Procedure

  1. Check whether the members of the Eth-Trunk interface in static LACP mode have optical fibers incorrectly connected based on LocalParam and PDUParam in the log.

    • If optical fibers were connected incorrectly, go to Step 2.
    • If optical fibers were connected correctly, go to Step 3.

  2. Connect the optical fibers correctly.
  3. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 570207

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next