No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MRM/6/CAC_OIF_TOTAL

MRM/6/CAC_OIF_TOTAL

Message

MRM/6/CAC_OIF_TOTAL:In VPN instance "[vpn-instance-name]", because the number or bandwidth of PIM route entries which use the interface [interface-name] as OIF reached the total limit on this interface, PIM discarded the received Join message ([source-address], [group-address]). The current statistical number of these PIM routing entries is [statistical-number], the statistical bandwidth is [statistical-bandwidth]. (FlCode=[STRING][ULONG])

Description

The total of PIM entries, existing and newly added, exceeded the total limit configured on the outgoing interface, and thus the received Join message that recorded the newly added PIM entry was discarded.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[interface-name] Indicates the interface name.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[statistical-number] Indicates the statistics of PIM entries.
[statistical-bandwidth] Indicates the statistics of bandwidth.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the total limit was set on the outgoing interface, the number of PIM entries or the statistics of bandwidth reached the limit.

Procedure

  • If services are not affected, no action is required.
  • If services are affected, run the multicast limit out max-entry limit command in the interface view to increase the maximum number of PIM entries with the current interface as the outbound interface.
  • If increasing the maximum number is not allowed due to the system processing capability limit, Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 540008

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next