No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/6/TRAP_VIR_INTF_RETX:Virtual interface has retransmitted. (ProcessId=[USHORT], RouterId=[IPADDR], Area=[IPADDR], Neighbor=[IPADDR], PacketType=[ULONG], LsdbAreaId=[IPADDR], LsdbType=[ULONG], LsdbLsId=[IPADDR], LsdbRouterId=[IPADDR])


Packets were resent through the virtual interface.


Parameter Name Parameter Meaning
ProcessId Indicates the ID of an OSPF process.
RouterId Indicates the ID of a router.
Area Indicates the ID of an area.
Neighbor Indicates the IP address of a neighbor.
PacketType Indicates the packet type.
LsdbAreaId Indicates the area ID of an LSA in the LSDB.
LsdbType Indicates the type of an LSA in the LSDB.
LsdbLsId Indicates the ID of an LSA in the LSDB.
LsdbRouterId Indicates the router ID in the LSDB.

Possible Causes

Packets were resent through the virtual interface.


  1. This log message is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 575164

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next