No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PAF/4/READLCSFAIL

PAF/4/READLCSFAIL

Message

PAF/4/READLCSFAIL:Failed to read License file when initializing LCS. (ErrorCode=[LONG])

Description

Failed to read the License file in initialization.

Parameters

Parameter Name Parameter Meaning
ErrorCode

Indicates the error code:

-2: indicates that the handle is invalid.

-3: indicates the pointer is invalid.

-4: indicates the opening type is incorrect.

-5: indicates that the parameter is incorrect.

Possible Causes

Failed to read the License file when initializing the License file.

Procedure

  1. Run the dir license.txt command to check whether the license.txt exists. If so, check whether the length of the file is longer than zero. If so, run the copy license.txtslave#flash:/ command to copy the license to the slave board. Then, run the slave restart command to restart the slave board.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 569210

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next