No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



RRPP/5/PFWD:Domain [domain-id] ring [ring-id] port [port-name] has been set to forwarding state.


The port along the RRPP ring changed to the forwarding state.


Parameter Name Parameter Meaning
[domain-id] indicates the ID of an RRPP domain.
[ring-id] indicates the ID of an RRPP ring.
[port-name] indicates the name of the port along the RRPP ring.

Possible Causes

The port changed to the forwarding state.


  1. This log message is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 540166

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next