No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



MRM/6/CAC_GLB_TOTAL:In VPN instance "[vpn-instance-name]", PIM discarded the received Join message ([source-address], [group-address]) because the number of PIM route entries reached the global limit. The current statistical number of PIM route entries of this instance is [statistical-number]. (FlCode=[STRING][ULONG])


The total number of PIM entries, existing and newly added, exceeded the global entry limit, and thus the received Join message that recorded the newly added PIM entry was discarded.


Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[statistical-number] Indicates the statistics of PIM entries.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the global entry limit was set, the number of PIM entries reached the limit.


  • If services are not affected, no action is required.
  • If services are affected, run the igmp global limit command in the multicast channel view of the corresponding instance to increase the maximum number of PIM entries that can be created for the channel.
  • If increasing the maximum number is not allowed due to the processing capability limit of the system, Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 568611

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next