No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RSVP/6/RSB_CLEAN_TIMEOUT

RSVP/6/RSB_CLEAN_TIMEOUT

Message

RSVP/6/RSB_CLEAN_TIMEOUT:The cleanup timer of RSB expired. (IngressLsrId=[IPADDR], TunnelId=[USHORT], EgressLsrId=[IPADDR], LspId=[USHORT], LastRecRefreshTime [ULONG]:[ULONG]:[ULONG](Hour:Minute:Second), CleanupTime=[ULONG](Second))

Description

The RSB's cleanup timer expired.

Parameters

Parameter Name Parameter Meaning
IngressLsrId Indicates the LSR ID of the ingress in the Resv message.
TunnelId Indicates the ID of a tunnel.
EgressLsrId Indicates the LSR ID of the egress in the Resv message.
LspId Indicates the LSP ID.
LastRecRefreshTime Indicates the last time when receiving a Resv Refresh message.
CleanupTime Indicates the timeout period of the RSB cleanup timer

Possible Causes

The RSB failed to be updated, causing its cleanup timer to expire. For example, between two directly-connected devices, if one directly-connected interface of a device fails, the device cannot send a Resv Refresh message. As failing to receiving the Resv Refresh message, the other device deletes the TE tunnel after the RSB cleanup timer expires.

Procedure

  1. Check whether there is an operation that shuts down the interface or interrupts services.
  2. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 575635

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next