No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CLOCK/4/DSP_ERROR

CLOCK/4/DSP_ERROR

Message

CLOCK/4/DSP_ERROR:The DSP on the clock board has an error.

Description

The clock board detects that the DSP is faulty.

Parameters

Parameter Name Parameter Meaning
None. None.

Possible Causes

1: The DSP program is not loaded.

2: The clock board is faulty.

Procedure

  1. Restart the MPU to check whether the log persists.

    • If not, the DSP program is not loaded normally.
    • If so, the clock board is faulty.

  2. Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 576542

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next