No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
APS/7/DEFECT_NOTIFY_PFM

APS/7/DEFECT_NOTIFY_PFM

Message

APS/7/DEFECT_NOTIFY_PFM:Defect changed failed to notify plat. (EventType=[ULONG], MoudleID=[ULONG], GroupIndex=[ULONG], WorkingProtectionMiss=[ULONG], LocalSMissFarBFlag=[ULONG], ProtectionModeMiss=[ULONG], RevertiveModeMiss=[ULONG], ErrorCode=[ULONG])

Description

After detecting inconsistency, the APS state machine notified the service module of the devices to process the result. If the notification failed, the notified information was recorded for later analysis.

Parameters

Parameter Name Parameter Meaning
EventType Indicates the type of an event.
MoudleID Indicates the index of a module.
GroupIndex Indicates the index of a protection group.
WorkingProtectionMiss Indicating the working link and the protection link are inconsistent.
LocalSMissFarBFlag Indicates that the local receiving link and the remote sending link are inconsistent.
ProtectionModeMiss Indicates that the protection mode is inconsistent.
RevertiveModeMiss Indicates that the revertive mode is inconsistent.
ErrorCode Indicates an error code.

Possible Causes

After detecting inconsistency, the APS state machine failed to notify the service module of the devices to process the result.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 547939

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next