No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS/5/T3TMR_STOP_CMD

ISIS/5/T3TMR_STOP_CMD

Message

ISIS/5/T3TMR_STOP_CMD:ISIS [process-id] stopped T3 timer because of restart disable.

Description

IS-IS stopped the T3 timer on an interface because the restart command was deleted.

Parameters

Parameter Name Parameter Meaning
[process-id] Indicates the ID of an IS-IS process.

Possible Causes

When canceling restart, ensure that the related T3 timer is stopped.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 543794

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next