No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/6/ADD_NBR_PRLIST_VLINK:OSPF [process-id] adds virtual neighbor to pre-restart neighbor list. (RouterId=[IPADDR], TransitAreaId=[IPADDR], HelperVirtNbrCount=[ULONG], HelperShamLinkNbrCount=[ULONG], HelperNormalNbrCount=[ULONG])


OSPF detected a pre-restart neighbor on the virtual link.


Parameter Name Parameter Meaning
[process-id] Indicates the ID of an OSPF process.
RouterId Indicates the ID of a router.
TransitAreaId Indicates the ID of the transit area.
HelperVirtNbrCount Indicates the number of neighbors that establish the virtual link with the Helper.
HelperShamLinkNbrCount Indicates the number of the sham link.
HelperNormalNbrCount Indicates the number of normal neighbors.

Possible Causes

OSPF detected a pre-restart neighbor on the virtual link.


  1. This log message is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 571923

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next