No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



LDP/4/SAMADDRESS:Received same address from different sessions. (Address=[STRING], OldPeer=[STRING], NewPeer=[STRING])


The same address from different sessions was received.


Parameter Name Parameter Meaning
Address Indicates the LSR ID of the peer.
OldPeer Indicates the LSR ID of the old peer.
NewPeer Indicates the LSR ID of the new peer.

Possible Causes

The same address from different peers was received.


  1. Run the display current-configuration command to check whether the same address is configured.
  2. Operators should check whether network attacks exist.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 579172

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next