No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



MSTP/4/EDGE_PORT:Edged-port [port-name] received BPDU packet, then the active state of the edged-port will be disabled!


After an edge port received a BPDU, the port turned to inactive.


Parameter Name Parameter Meaning
[port-name] indicates the name of an edge port.

Possible Causes

The edge port received the BPDU.


  • Run the stp edged-port enable command in the interface view to reconfigure the status of the edge port.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 574549

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next