No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



SW_SNPG/4/QUERY_INTERVAL_DIFF:The interval of IGMP general query packet received is greater than that of current configuration. (InstanceName=[STRING], Ifname=[STRING], QueryReceInterval=[LONG]s, QueryInterval=[LONG]s)


The interval of received IGMP General Query messages is larger than the interval configured on the switch.


Parameter Name Parameter Meaning
InstanceName Indicates the instance Name.
Ifname Indicates the interface Name.
QueryReceInterval Indicates the the interval of received IGMP General Query messages.
QueryInterval Indicates the the interval configured on the local switch.

Possible Causes

The IGMP general query interval configured on the switch is different from that configured on the gateway switch.


  1. Run the igmp-snooping query-interval query-interval command in the VLAN view on the switch to set the general query interval to a value larger than that configured on the gateway switch.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 568632

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next