No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MFIB/4/GR_END

MFIB/4/GR_END

Message

MFIB/4/GR_END:GR end ([STRING]). (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])

Description

The MFIB enters the GR final state.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the identification of VPN.
Protocol Indicates the flag of IPv4 or IPv6.
Vpn Indicates the name of a VPN instance.
FileLine Indicates the name of the source code file and the line number.

Possible Causes

GR is complete after the master-slave switchover.

Procedure

  • Run the display diagnostic-information command, save the command output, and then contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 575914

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next