No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MCAST/3/MVPN_NEXT_HOP

MCAST/3/MVPN_NEXT_HOP

Message

MCAST/3/MVPN_NEXT_HOP:Failed to allocate nexthop index or failed to add nexthop table.

Description

The system failed to allocate a next hop index or issue a next hop entry.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

There are a large number of MPLS LSPs or unicast routes in the system, which use up all the next hop resources. Therefore, no next hop resource can be allocated to the multicast VPN function.

Procedure

  1. Run the display mpls ldp lsp or display ip routing-table command to check whether there are a large number of unnecessary MPLS LSPs or unicast routes.
  2. Delete unnecessary MPLS LSPs or unicast routes.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 543356

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next