No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MRM/6/CAC_OIF_TOT_LIMIT

MRM/6/CAC_OIF_TOT_LIMIT

Message

MRM/6/CAC_OIF_TOT_LIMIT:In VPN instance "[vpn-instance-name]", the number or bandwidth of existed PIM routing entries which use the interface [interface-name] as OIF exceeded the total limit on this interface. The current statistical number of these PIM routing entries is [statistical-number], the statistical bandwidth is [statistical-bandwidth]. On this interface, the total count limit is [limit-number] and the total bandwidth limit is [limit-bandwidth]. (FlCode=[STRING][ULONG])

Description

The number of existing entries or the statistics of bandwidth exceeded the total limit configured on the interface.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[interface-name] Indicates the interface name.
[statistical-number] Indicates the statistics of PIM entries.
[statistical-bandwidth] Indicates the statistics of bandwidth.
[limit-number] Indicates the limit of PIM entries.
[limit-bandwidth] Indicates the limit of bandwidth.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the total limit was set on the interface, the number of existing PIM entries exceeded the limit.

Procedure

  • This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 541036

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next