No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ALML/4/FAN_LOWER:The "[STRING1]" sensor of [STRING2](entity) detects that the fan speed fell below the lower [STRING3] limit.(SensorNum=[ULONG], Value=[STRING4], UpperThreshold=[STRING5], LowerThreshold=[STRING6])


The fan speed is lower than the minimum value.


Parameter Name Parameter Meaning
STRING1 Sensor name
STRING2 Entity name
STRING3 Alarm level
SensorNum Sensor No.
Value Fan speed
UpperThreshold Fan speed upper threshold
LowerThreshold Fan speed lower threshold

Possible Causes

The fans are faulty.


  • Rectify the fault according to "A Fan Fails" in the Revelations of Troublesolving - Campus Switch - Hardware Fault.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 542520

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next