No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TUNN_PS/2/TUNN_ID_CFG_FAIL

TUNN_PS/2/TUNN_ID_CFG_FAIL

Message

TUNN_PS/2/TUNN_ID_CFG_FAIL:The configured tunnel ID of protection tunnel is wrong! (ID=[ULONG])

Description

The configured ID of the protection tunnel is incorrect.

Parameters

Parameter Name Parameter Meaning
ID indicates the number of a protection tunnel.

Possible Causes

The tunnel ID is incorrect.

Procedure

  • Run the display current-configuration command to check whether the configuration is correct.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 540198

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next