No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



MCAST/3/L3INTF:Failed to read vlanif index(VlanID=[ULONG]).


Reading the VLANIF interface index fails during sending of multicast forwarding entries in IP forwarding mode.


Parameter Name Parameter Meaning
VlanID Indicates the VLAN ID

Possible Causes

The VLANIF index has been deleted.


  1. Re-configure the VLANIF interface and services on the interface according to the log information. Then re-configure multicast services. If this log persists, go to step 2.
  2. Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 548100

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next