No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS/5/CIRC_STATE_SET

ISIS/5/CIRC_STATE_SET

Message

ISIS/5/CIRC_STATE_SET:The status of the ISIS [process-id] interface is [interface-state]. (interface=[STRING])

Description

The log message was generated when the IS-IS interface status was changed.

Parameters

Parameter Name Parameter Meaning

[process-id]

Indicates the ID of an IS-IS process.

[interface-state]

The status of the IS-IS interface.
  • MTU UP

  • MTU DOWN

  • IP UP

  • IP DOWN

  • LINK UP

  • LINK DOWN

interface

Indicates the name of an interface.

Possible Causes

reset isis all

isis enable

isis ipv6 enable

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 546451

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next