No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



SECE/6/PORT_ATTACK_END:Auto port-defend stop.(SourceAttackInterface=[STRING], AttackProtocol=[STRING], ExceededPacketCountInSlot=[STRING])


Port attack defense is canceled.


Parameter Name Parameter Meaning
SourceAttackInterface Indicates the attack source interface.
AttackProtocol Indicates the protocol type of attack packets.

Indicates the number of discarded packets. When port attack defense is triggered on multiple interfaces, packet loss may be recorded on other interfaces besides the interface recorded in the log.

Possible Causes

After you exclude an attack source, the device cancels attack defense on the interface.


  1. This log is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 553542

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next