No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



GRESM/3/TokenConflict: Tokens resources conflicted when a specified token was applied for. (OldAppId=[ULONG], TokenHandle=[ULONG], NewAppId=[ULONG], TunnelID=[ULONG])


When being saved to the slave main control board, the token resource allocated to a service module conflicted with the token resource being used by another service module on the slave main control board.


Parameter Name Parameter Meaning
OldAppId ID of the service module that is using the token resource.
TokenHandle Token space address.
NewAppId ID of the service module to which the token resource is allocated.
TunnelID Tunnel ID.

Possible Causes

The token resource allocated to the service module had the same token ID as the token resource being used by another service module on the slave main control board.


  • Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 543529

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next