No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/6/VLINK_IF_CHG_E

OSPF/6/VLINK_IF_CHG_E

Message

OSPF/6/VLINK_IF_CHG_E:Virtual link interface [vlink-interface-address] received event [interface-event], interface state changed from [interface-previous-state] to [interface-current-state]. (ProcessId=[USHORT])

Description

The status of the interface on the virtual link changed.

Parameters

Parameter Name Parameter Meaning
[vlink-interface-address] Indicates the IP address of the interface on the virtual link.
[interface-event] Indicates the events on the interface.
[interface-previous-state] Indicates the previous status of the interface.
[interface-current-state] Indicates the current status of the interface.
ProcessId Indicates the ID of an OSPF process.

Possible Causes

The status of the interface on the virtual link changed.

Procedure

  1. Run the display ospf interface command to check status of the interface.
  2. Contact contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 578389

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next