No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/4/TRAP_INTF_AUTH_FAIL

OSPF/4/TRAP_INTF_AUTH_FAIL

Message

OSPF/4/TRAP_INTF_AUTH_FAIL:Interface authentication has failed. (ProcessId=[USHORT], RouterId=[IPADDR], IpAddress=[IPADDR], AddressLessIndex=[ULONG], PacketSource=[IPADDR], ErrorType=[ULONG], PacketType=[ULONG])

Description

The interface authentication failed.

Parameters

Parameter Name Parameter Meaning
ProcessId Indicates the ID of an OSPF process.
RouterId Indicates the ID of a router.
IpAddress Indicates the IP address.
AddressLessIndex Indicates the index of the IP address.
PacketSource Indicates the source address of a packet.
ErrorType Indicates the error type.
PacketType Indicates the packet type.

Possible Causes

The interface authentication failed.

Procedure

  1. Run the display ospf interface command to check the authentication configuration of the virtual interface and the neighbor router.
  2. Contact contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 543114

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next