No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SECE/4/STRACK_ERROR_DOWN

SECE/4/STRACK_ERROR_DOWN

Message

SECE/4/STRACK_ERROR_DOWN: Interface's status is changed to error-down because an attack is detected. Interface=[OCTET].

Description

An interface transitions to error-down state because an attack is detected on the interface.

Parameters

Parameter Name Parameter Meaning
Interface Indicates the interface that receives attack packets.

Possible Causes

The attack tracing module detects an attack, and the attack defense action is set to error-down.

Procedure

  1. Check whether the discarded packets are sent from an authorized user.
  2. If the sender is an authorized user, run the auto-defend whitelist whitelist-num { acl acl_number | interface interface-type interface-number } command to add the user to the whitelist. Then packets sent from this user are not discarded.
  3. If the sender is an attacker, you do not need to perform any operation.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 545490

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next