No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VBST/4/BPDUPROTECT

VBST/4/BPDUPROTECT

Message

VBST/4/BPDUPROTECT: This edged-port [port-name] that enabled BPDU-Protection will be shutdown, because it received BPDU packet.

Description

The edge port enabled BPDU protection received BPDUs and was shut down.

Parameters

Parameter Name Parameter Meaning
[port-name] Indicates the name of edge port.

Possible Causes

The edge port received BPDUs, and BPDU protection was enabled globally.

Procedure

  1. Check whether the interface is directly connected to a user terminal and can be specified as an edge port.

    • If the interface is directly connected to a user terminal and therefore can be specified as an edge port, go to Step 2.
    • If the interface is indirectly connected to a user terminal and therefore cannot be specified as an edge port, go to Step 3.

  2. Locate the source of the BPDUs on the interface and check whether the malicious attack exists.

    • If the malicious attack exists, go to Step 4.
    • If the malicious attack does not exist, go to Step 3.

  3. Run the undo stp edged-port and undo shutdown commands in the interface view to delete the configuration of the edge port and restart the interface. Then, check whether the log persists. If the log persists, go to Step 4.
  4. Collect trap, log, and configuration information, and contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 553772

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next