No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SECE/4/STORMCTRL_BC_BLOCKED

SECE/4/STORMCTRL_BC_BLOCKED

Message

SECE/4/STORMCTRL_BC_BLOCKED:Broadcast packets are blocked at interface [STRING].

Description

Broadcast packets were blocked on the interface.

Parameters

Parameter Name Parameter Meaning

[STRING]

Indicates the interface name.

Possible Causes

A broadcast storm occurred on the interface, and the rate of broadcast packets received on the interface exceeded the upper threshold. As a result, broadcast packets were blocked on the interface.

Procedure

  • Check whether the broadcast storm is caused by a loop. If so, remove the loop. When the average rate of broadcast packets received on the interface falls below the lower threshold, broadcast packets are properly forwarded by the interface. For the broadcast storm troubleshooting procedure, see MAC Address Flapping Occurs on a Layer 2 Network and STP Faults Occur in the Revelations of Troublesolving.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 542662

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next