No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



L2V/3/CEOUTOFRANGE: The local CE cannot communicate with the remote CE because the CE ID exceeds the range. (Local: CeId=[ULONG], VpnRd=[STRING]; Remote: CeId=[ULONG], Pe=[STRING], VpnRd=[STRING])


The local CE cannot communicate with the remote CE because the CE ID exceeds the range.


Parameter Name Parameter Meaning
Local: Indicates the local device.
CeId Indicates the local CE ID.
VpnRd Indicates the local VPN Route Distinguisher (RD).
Remote: Indicates the remote device.
CeId Indicates the remote CE ID.
Pe Indicates the IP address of the remote PE.
VpnRd Indicates the remote VPN RD.

Possible Causes

When the Kompella VLL is configured, the ID of the local CE was beyond the range on the remote CE.


  1. Change the ID of the local CE to be smaller one or extend the range on the remote CE.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 568614

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next