No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MD/6/REUSED_SWTGRP

MD/6/REUSED_SWTGRP

Message

MD/6/REUSED_SWTGRP:In VPN instance "[vpn-instance-name]", a Data MDT [switch-group-pool] was reused, the counter was [counter]. (FlCode=[STRING][ULONG])

Description

Failed to allocate the address for the switching group because the address has been used.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[switch-group-pool] Indicates the address of switching group pool.
[counter] Indicates the number of the reused address of switching group pool.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The Group-Switching message of the MD was received.

Procedure

  • This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 574356

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next