No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



CM/0/USER_ADDSERVICEFAIL: Failed to set the user ([STRING]) service. Please check whether ACL resources are sufficient.


The user service (such as CAR or tariff) fails to be set.


Parameter Name Parameter Meaning
[STRING] Indicates the user's IP address and MAC address.

Possible Causes

The ACL resource is exhausted.


  1. Check whether the ACL resources are proper.

    • If so, replace the device with a higher-performance device.
    • If not, delete unnecessary ACL resources.

  2. Collect log information and contact technical support personnel.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 553106

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next