No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SECE/4/STICKY_MAC_CONFLICT

SECE/4/STICKY_MAC_CONFLICT

Message

SECE/4/STICKY_MAC_CONFLICT:The MAC address entry of another type already exists. (MAC=[OCTET])

Description

The device failed to generate a snooping MAC entry after the user-bind ip sticky-mac command was run.

Parameters

Parameter Name Parameter Meaning
MAC MAC address that conflicts with the MAC address in the snooping MAC entry.

Possible Causes

A static MAC address on the device contains the same MAC address as that in the snooping MAC entry and its type is different from that of the snooping MAC entry.

Procedure

  1. The switch already has static MAC entries. The static MAC entries are not updated dynamically. Therefore, snooping MAC entries do not need to be generated based on the binding table. This log is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 547801

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next