No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



MCAST/3/OVER_INDEX: The IPMC index is out of the index range on the board. (VLAN=[ULONG], source=[STRING], group=[STRING], index=[ULONG], max index=[ULONG], index type=[ULONG])


The IPMC index is beyond the index range on the LPU.


Parameter Name Parameter Meaning
VLAN Indicates a VLAN ID.
source Indicates the IP address of a multicast source.
group Indicates a multicast group address.
index Indicates the current IPMC index.
max index Indicates the maximum index value.
index type Indicates the index type.

Possible Causes

The number of IPMC indexes has exceeded the upper limit.


  • Run the display multicast forwarding-table or display l2-multicast forwarding-table command to check multicast entries in the system. Delete unnecessary groups based on service requirements.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 569113

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next