No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



SECE/4/ARP_PACKET_BLOCK: ARP packets were blocked (SourceInterface=[STRING], block time = [ULONG] seconds).


All the packets on the interface are blocked at the time specified by block time.


Parameter Name Parameter Meaning
SourceInterface Indicates the inbound interface of ARP packets.
block time Indicates the time ARP packets are blocked.

Possible Causes

After rate limiting on ARP packets is configured on an interface, if the rate of ARP packets exceeds the rate limit, the system delivers an ACL to discard ARP packets on the interface.


  • If user services are not affected, the alarm does not need to be handled.
  • If the user services are intermittently disconnected, run the arp anti-attack rate-limit packet packet-number command in the interface view to adjust the ARP rate limit. Adjusting the rate limit may affect CPU usage. You are advised to contact technical support personnel.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 546072

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next