No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALML/0/POWER_DC1600_NORMAL

ALML/0/POWER_DC1600_NORMAL

Message

ALML/0/POWER_DC1600_NORMAL:Power invalid for not supporting DC1600 resumed.(PhysicalName=[STRING])

Description

The alarm that the device has an unsupported 1600 W DC power module installed is cleared.

Parameters

Parameter Name Parameter Meaning
PhysicalName Indicates the physical entity name.

Possible Causes

The unsupported power module was removed or replaced by the power module supported by the device.

Procedure

  1. No action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 575161

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next