No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



CLOCK/4/TOD_LOCK_FAIL:The time is locked unsuccessfully.


The time lock condition of the clock board degrades.


Parameter Name Parameter Meaning
None. None.

Possible Causes

1. On the clock boards, the number of times the time stamp is adjusted exceeds a certain value.

2. If the time source is changed from the external time source to the local time source, this log is generated. It is normal.


  1. Run the display clock mode command to check whether the traced time source is correct, and run the display clock source command to check whether the status of each time source is correct.
  2. If the preceding information is correct, Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 568601

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next