No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MRM/6/CAC_UNSPEC_DENY

MRM/6/CAC_UNSPEC_DENY

Message

MRM/6/CAC_UNSPEC_DENY:In VPN instance "[vpn-instance-name]", PIM discarded the received Join message ([source-address], [group-address]) because the "unspecified-channel deny" function has been configured. (FlCode=[STRING][ULONG])

Description

The received Join message was for an unknown channel and thus was discarded because the function of the CAC policy unspecified-channel deny was configured.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the function of the CAC policy unspecified-channel deny was configured, the received PIM entry did not join any channels.

Procedure

  • If services are not affected, no action is required.
  • If services are affected, run the group group-address mask { group-mask-length | group-mask } [ source source-address mask { source-mask-length | source-mask } ] [ per-bandwidth traffic-rate ] command in the channel view to add the group to the channel. If adding the group to the channel affects overall channel allocation, you are advertised to contact technical support personnel
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 551235

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next