No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFNET/6/REPEAT_NOTIFY

IFNET/6/REPEAT_NOTIFY

Message

IFNET/6/REPEAT_NOTIFY:The Application module repeatedly notified the fault. (InterfaceName=[STRING], State=[STRING])

Description

The application module repeatedly reported the fault.

Parameters

Parameter Name Parameter Meaning
InterfaceName indicates the interface name.
State indicates the status of the link layer protocol.

Possible Causes

The application module repeatedly reported the fault.

Procedure

  1. Run the display diagnostic-information command, save the command output, and then Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 570334

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next