No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ETRUNK/4/STATE_CHG

ETRUNK/4/STATE_CHG

Message

ETRUNK/4/STATE_CHG:The status of an E-Trunk changed. (ETrunkId=[ULONG], OldState=[STRING], OldReason=[STRING], NewState=[STRING], NewReason=[STRING])

Description

The status of an E-Trunk changed.

Parameters

Parameter Name Parameter Meaning
ETrunkId Indicates the E-Trunk ID.
OldState Indicates the old state
  • Init: Indicates the initialization state.

  • Backup: Indicates the backup state.

  • Master: Indicates the master state.

OldReason Indicates the causes of the old state
  • PRI: Indicates the priority calculation.

  • TIMEOUT: Indicates the timeout.

  • BFD_DOWN: Indicates that the BFD session is Down.

  • PEER_TIMEOUT: Indicates that the peer device times out.

  • PEER_BFD_DOWN: Indicates that the peer BFD session is Down.

  • INIT: Indicates the initialization.

NewState Indicates the new state
  • Init: Indicates the initialization state.

  • Backup: Indicates the backup state.

  • Master: Indicates the master state.

NewReason Indicates the causes of the new state
  • PRI: Indicates the priority calculation.

  • TIMEOUT: Indicates the timeout.

  • BFD_DOWN: Indicates that the BFD session is Down.

  • PEER_TIMEOUT: Indicates that the peer device times out.

  • PEER_BFD_DOWN: Indicates that the peer BFD session is Down.

  • INIT: Indicates the initialization.

Possible Causes

The status of an E-Trunk changed or the cause of status changed. For example, the E-Trunk was the backup; when the E-Trunk did not receive protocol packets from the peer device within the timeout period, it became the master.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 543897

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next