No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



NQA/4/UPLOAD_FILE: The operation of uploading file completed. (SrcFile=[SrcFile], FileSize=[FileSize]Bytes, DstFile=[DstFile], TransferProtocol=[TransferProtocol], UserName=[UserName], DstHost=[DstHost], VPN=[VPN], Time=[Time], Result=[Result])


A file was uploaded onto a server using FTP or SFTP.


Parameter Name Parameter Meaning
SrcFile Source file name
FileSize File size, in bytes
DstFile Target file name
TransferProtocol Transport protocol
UserName User name
DstHost Destination IP address
VPN VPN instance name
Time Date and time
Result Upload result

Possible Causes

NQA automatically uploaded a test result file.


  1. Check whether the parameters of the push function and network connections are connect. If the parameters and network connections are correct, record the log file and Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 541499

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next