No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EZOP/4/NO_CLIENTINFO

EZOP/4/NO_CLIENTINFO

Message

EZOP/4/NO_CLIENTINFO:Information about this device does not exist on the commander(IP=[STRING], Macaddress=[STRING], Devicetype=[STRING]).

Description

The Commander does not have client information about the device.

Parameters

Parameter Name Parameter Meaning
IP Indicates the client IP address.
Macaddress Indicates the client MAC address.
Devicetype Indicates the client device type.

Possible Causes

A client requests to join the Commander, but the Commander does not have information about the client.

Procedure

  1. Check whether the client is a planned device according to the parameters in the log message.

    • If not, no further action is required.
    • If so, go to step 2.

  2. Add the client to the Commander based on the client status.

    • Regardless of whether the client is an unconfigured device, you can run the client [ client-id ] { mac-address mac-address | esn esn } command in the Easy-Operation view to configure the matching rules for the client.
    • If the client is not an unconfigured device, you can run the client auto-join enable command in the Easy-Operation view to enable the client to automatically join the Commander.
    • If the client is an unconfigured device, you can run the client auto-join enable command in the Easy-Operation view to enable the client to automatically join the Commander, and enable the network topology collection function on the Commander. For details, see (Optional) Configuring Network Topology Collection in "EasyDeploy Configuration" in the S9300, S9300E, and S9300X V200R010C00 Configuration Guide - Basic Configuration.
    • If the client is an unconfigured device, you can run the group build-in device-type command in the Easy-Operation view to create a built-in group and specify the device-type parameter to set the matching device type.
    • If the client is an unconfigured device, you can configure the matching rule for the customized group in the Easy-Operation view.

      1. Run the group custom { mac-address | esn | ip-address | model | device-type } group-name command to configure a customized group and enter the group view.

      2. Run the match { mac-address mac-address [ mac-mask | mac-mask-length ] | esn esn | ip-address ip-address [ ip-mask | ip-mask-length ] | model model | device-type device-type } command to define the matching rule for the customized group.

    • If the client is an unconfigured device that will replace a faulty client, you can run the client client-id replace { mac-address mac-address | esn esn } command in the Easy-Operation view to specify the client ID of the faulty client and configure information about the replacement between the faulty and new devices.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 569790

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next