No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CM/4/UCLGROUP_RESOURCE_FULL

CM/4/UCLGROUP_RESOURCE_FULL

Message

CM/4/UCLGROUP_RESOURCE_FULL:[STRING]

Description

The number of static resource groups created on the card exceeded the upper limit allowed by the card, or the IP addresses in the UCL group are incorrect.

Parameters

Parameter Name Parameter Meaning
[STRING]
  • The UCL group IP feature is not supported.
  • The UCL group IP is referred by '%s'.
  • The UCL group IP exists.
  • The UCL group IP does not exist.
  • The UCL group IP is up to the max number %lu.
  • Invalid UCL group IP subnet.
  • Invalid UCL group IP subnet mask.
  • The UCL group subnet overlaps with another configuration.
  • The local-access-user's ip conflicts with another user.

Possible Causes

  • The number of static resource groups created on the card exceeded the upper limit allowed by the card.
  • The IP addresses in the UCL group were incorrect.

Procedure

  • Run the display ucl-group all command to view information about all UCL groups that have been created. If the number of static resource groups reaches the upper limit allowed by the card, no more static resource group can be created. Adjust the UCL group configuration.
  • Run the display ucl-group ip command to view information about UCL groups, and ensure that the UCL groups are correctly configured.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 546597

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next