No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS/6/SB_CIR_NOT_ENABLE

ISIS/6/SB_CIR_NOT_ENABLE

Message

ISIS/6/SB_CIR_NOT_ENABLE:ISIS [process-id] static BFD was not enabled on interface [interface-name].(InterfaceIndex=[STRING])

Description

IS-IS static BFD was not enabled on the interface.

Parameters

Parameter Name Parameter Meaning

[process-id]

Indicates the ID of an IS-IS process.

[interface-name]

Indicates the name of an interface.

InterfaceIndex

Indicates the interface index.

Possible Causes

The static BFD function was not enabled on the interface.

Procedure

  1. Judge whether the static BFD function needs to be enabled on the interface. If so, go to Step 2; if not, go to Step 3.
  2. Run the isis bfd static command.
  3. End.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 539942

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next