No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



IPV6FIBAGENT/4/PLYDELE6:The routes were deleted due to FIB6 policy change. (QueueLength=[ULONG], MaxLength=[ULONG], UnreadNumber=[ULONG])


FIB6 entries were being deleted according to the changes of FIB6 policies.


Parameter Name Parameter Meaning
QueueLength indicates the length of a queue.
MaxLength indicates the maximum length of a queue.
UnreadNumber indicates the number of unread messages in the IPC queue.

Possible Causes

When the FIB6 module on the interface board read the IPC message queue, the queue length was longer than the specified value and the length of the queue containing unread messages was also longer than the set value.


  1. This log message indicates a normal situation, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 542663

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next