No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TNLM/5/SET_POLICY_NAME

TNLM/5/SET_POLICY_NAME

Message

TNLM/5/SET_POLICY_NAME:Failed to set the tunnel policy name.(ReturnValue=[ULONG])

Description

The value returned by the function includes VOS_ERR, TNLM_INFO_PolicyNotAvail, TNLM_INFO_LowMemory, and TNLM_MEMORY_FAILURE.

Parameters

Parameter Name Parameter Meaning
ReturnValue Indicates the value returned by the function.

Possible Causes

Failed to add the tunnel policy.

Procedure

  1. Run the tunnel-policy tunnel-policy-name command in the system view to save the log information.
  2. Collect log information and configuration information, and then contact technical support personnel.
  3. End.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 578420

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next