No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



TUNN_PS/2/INFO_CMD_DISP:Cann't get the cr-lsp when executing the command of display!


The CR-LSP cannot be found when the display command was processed.


Parameter Name Parameter Meaning
None None

Possible Causes

The interface information obtained according to the working tunnel ID was null, and information about the CR-LSP in the interface information was null.


  1. Check whether the configuration of the protection group is correct.
  2. If the configuration is incorrect, reconfigure the protection group.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 577525

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next