No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EFM/4/TRIGGERIFNET

EFM/4/TRIGGERIFNET

Message

EFM/4/TRIGGERIFNET:EFM trigger interface. (InterfaceName=[STRING], Result=[INTEGER])

Description

The service of interface was blocked by the EOAM 3AH module.

Parameters

Parameter Name Parameter Meaning
InterfaceName Indicates the name of an interface.
Result Indicates the Status of fault. The detailed information is as followings:
  • Trigger interface up means fault recovery

  • Trigger interface down means fault occurrence

Possible Causes

The interface service block function of 802.3AH was configured, and 802.3AH sense the fault.

Procedure

  1. Check the configurations at both ends of the link.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 550688

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next