No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2V/3/PWLOOPDETECT

L2V/3/PWLOOPDETECT

Message

L2V/3/PWLOOPDETECT:A PW loop is detected. (VcId=[ULONG], VcType=[STRING], LoopIpAddress=[STRING])

Description

A PW loop was detected.

Parameters

Parameter Name Parameter Meaning
VcId VC ID
VcType VC type
LoopIpAddress IP address that causes the loop

Possible Causes

PW links formed a loop.

Procedure

  1. Adjust the configuration on the device based on VcId, VcType, and LoopIpAddress to prevent loops.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 568881

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next